|
| |
The Process
Identify
the Problem by Sewer Camera
When you call to
have us evaluate your sewer and drain lines the first thing we will do is
conduct a video inspection of your lines. The video is recorded on DVD format
and you are provided a copy of the DVD as well as a plot plan of how the sewer
lines run through your property. From here the technician will be able to
evaluate
your needs and recommend the best solution for your specific problem.
Clean
the pipes
Once the problem and
solution are identified, we clean out all roots and descale any calcite, etc. in
order
to return the pipe back to its original functioning diameter. To do this we
either jet the lines or use
pneumatic tools such as the scorpion cutter. Cast pipe may require additional
preparation if the pipe is
badly corroded or there is a void in the pipe.
Install
the liner
|
After the cleaning
process is complete, the lining process can begin. Based upon the solution you
and your
technician have decided upon, the length of liner needed is cut, a custom two
part epoxy is mixed and
poured in to permeate the felt liner. The saturated liner is then pulled in
place, the bladder is inflated
and the curing begins. Once the epoxy lining has cured, the bladder is
extracted, leaving a complete
structural pipe within a pipe. To insure that the job has been performed
perfectly, a post install video
inspection of the renewed lines is done to inspect the work and you receive a
copy of this as well. |
 |
|
